Operation 5
Checks and tasks to be carried out pr
ior to commissioning
2
Adjusting the seat backrest
Do not put pressure on the seat backrest while
disengaging it.
– Lift the lever (2) and hold.
– Push the seat backrest into the desired
position.
– Release the lever.
– Ensure that the seat backre
st is securely
engaged.
NOTE
The backwards tilt angle of the seat backrest
can be restricted by the structural condition of
the truck.
3
4
Adjusting the seat suspension
NOTE
The MSG 75 seat is equipped with electric air
suspension that is activated using an electric
switch instead of a lever (3).
The driver’s seat can be adjusted to suit the
weight of the individual driver. To achieve the
best seat suspension setting, the driver must
perform the adjustment whilst sitting on the
seat.
– Fully extend the weight adjusting lever (3).
– Pump it up or down to set the driver’s weight.
The correct driver’s weight has been selected
when the arrow (4) is in the centre of the
inspection window. If the seat does not
move any further when you pump the weight
adjusting lever, the minimum or maximum
weight setting has been reached.
– Return the weight adjusting lever to the
initial central position before each new lift (a
click can be heard).
– Fully fold in the weight adjusting lever once
adjustment is complete.
50
988078001 [EN] 61
To Next Page
Loading...
