97
If the Wired connection type is selected, the Network Mode row will be displayed (see Figure 4-75 on page 96
as a reference). Pressing anywhere within this row will allow you to select between a Static or Dynamic network
mode; Dynamic is selected by default. Use the Static and Dynamic radio buttons to select a network mode.
After selecting a network mode press the Back button to exit and return to the Network page; the selected
network mode will be indicated within the Connection Type row.
Figure 4-77: Select Wired Network Mode
If the Wireless connection type is selected, the Available Networks row will be displayed (see Figure 4-76 on
page 96 as a reference). Pressing anywhere within this row will open a page allowing you to scan for and
connect to an available Wi-Fi network. After selecting an available network, entering the password and/or
username required to connect to the network (if applicable), and saving the network configuration, press the
Back button to exit and return to the Network page; the name of the selected wireless network will be indicated
within the Available Networks row.
Figure 4-78: Select Wireless Network Mode
To Next Page
Loading...
