89
CALIBRATION
The Calibration page allows you to perform a variety of calibration procedures on the printer, including:
• Tip Calibration
• Touchscreen Calibration
To access the Calibration page, press the Calibration button within the Tools page; a screen similar to the
following will be displayed.
Figure 4-59: Calibration Page
TIP CALIBRATION
The printer’s calibration status will be displayed within the Tip Calibration row. Calibrated or Not Calibrated will
be displayed depending on the printer’s Calibration status.
Pressing anywhere within the Tip Calibration row will open a page allowing you to select from a variety of tip
calibration options.
Figure 4-60: Tip Calibration
Note: This section provides an overview of the Calibration page and its features,
but does not go into detail regarding calibration procedures. See “6 Calibration
and Adjustments” on page 140 for detailed calibration procedure information
and instructions.
To Next Page
Loading...
