Stratasys F270 - Modeling Materials; Materials Used

34
MODELING MATERIALS
MATERIALS USED
The F123 Series can use a variety of model materials, in a range of colors. QSR Soluble Release support
material is used in conjunction with all model materials, except for PLA. When building with PLA material, PLA is
used for both model and support materials (see Table 3-3 for model and support compatibility information).
Table 3-1 lists the material types available for use with each printer model.
Table 3-2 lists color availability by model material type.
Table 3-1: Available Materials
Table 3-2: Color Options
Printer Model Available Materials
F170
ABS, ASA, PLA
F270
ABS, ASA, PLA
F370
ABS, ASA, PLA, PC-ABS
Material Type Solid Color Options Translucent Color Options
ASA Ivory, Black, White, Dark Gray, Light Gray,
Red, Blue, Orange, Green, Yellow
ABS Ivory, Black, White, Dark Gray, Red, Blue,
Orange, Green, Yellow
PLA Black, White, Medium Gray, Light Gray,
Red, Blue
Natural, Red, Yellow, Green, Blue
PC-ABS Black, White