Stratasys F270 - Page 227

218
Oven not maintaining
temperatures
Heater failure. Contact Customer Support or your regional Stratasys office
(see “Getting Help” on page 204
for contact information).
Oven door open. Close the oven door; the heater turns off while the door is
open.
Oven door not sealing. Check oven door seal and verify that it is securely affixed to
oven door frame and does not exhibit cuts/tears.
If excessive wear is visible, Contact Customer Support or
your regional Stratasys office (see “Getting Help” on
page 204
for contact information).
Condition Possible Cause Remedy