iv
ABOUT THIS GUIDE
This guide is your introduction to building prototypes and end-use parts using a Stratasys
3D production, rapid prototype system. It is designed as a learning and reference tool that
explains system operation in an easy to understand, step-by-step, process.
HOW TO USE THIS GUIDE
This guide is divided into easy-to-follow chapters. You can read this guide chapter by
chapter or use the Table of Contents when you need to quickly find specific information.
Keeping this guide close to your printer will efficiently allow you to troubleshoot and
maintain the printer.
CONVENTIONS USED IN THIS GUIDE
The following conventions are used in this guide:
• When you see text in this font, it indicates a button being pressed via the User Interface touchscreen.
For example, press the Queue
button within the Navigation Menu.
• When you see text in blue, it indicates that the text is a linked reference to a specific figure, table,
heading, or page number.
• Standard bold text is used to emphasize items within instructional sequences or indicate a
navigational path you must follow to locate/start a software application, open or save a file on your
workstation PC, or perform an operation when working with GrabCAD Print. The > character is used
to separate items within a navigational path. For example, navigate to File > Open from the Main
Menu.
REVISION LOG
0.
Revision Date Description of Changes
A January 2017 First release of this document
B February 2017 Updated manual tip calibration procedure
C April 2017 Updated Troubleshooting chapter, Warnings and Errors
D December 2017 Updated User Interface, troubleshooting, and procedures
To Next Page
Loading...
