62
Warning (head unloaded)
Yellow coloring and an associated notification badge
indicates a head related warning (see “Head Warnings” on
page 216).
Additional information regarding the warning and possible
correction information is displayed by opening the associated
head’s Head Details page (see “Viewing Head Details” on
page 63).
When the head’s odometer reaches 1350 build hours a
warning will be displayed reminding you to order a
replacement head as the head is approaching is odometer
limit.
Warning (head loaded)
Error (head unloaded)
Red coloring and an associated notification badge indicates a
head related error (see “Head Errors” on page 216).
Additional information regarding the error and possible
correction information is displayed by opening the associated
head’s Head Details page (see “Viewing Head Details” on
page 63).
When the head’s odometer reaches 1500 build hours an
error will be displayed. The printer is still able to build with this
head, but you will be reminded before starting each build that
the head’s odometer limit has been reached and part quality
may be negatively affected. User action is required to replace
head. See “Head Replacement” on page 117 for instructions.
If the associated head is incompatible with the location where
it is installed (i.e. if the model head is installed in the support
head location), an error will be displayed. After clicking on the
error icon, a message will display with instructions to replace
whichever head (model or support) was incorrectly installed.
Error (head loaded)
Icon State Description
To Next Page
Loading...
