68
Empty Spool (solid yellow)
Material spool is empty - a volume of 0% is displayed.
User action required to remove empty spool. See “Unloading Material”
on page 113 and “Removing an empty Material Spool” on page 114 for
instructions.
Error (solid red)
Indicates that communication with the material bay is not possible.
Please note that this state differs from the unusable state as the icon is
solid red in this state and the bars within the center of the icon are not
visible.
Contact Customer Support or your regional Stratasys office if you
experience this icon state (see “Getting Help” on page 204
for contact
information).
Icon State Description
To Next Page
Loading...
