Stratasys Objet24 - Page 42

Using Objet Studio
5–6 DOC-34014 Rev. C
Ribbon
Commands
ThefollowingtableliststheTraySettingsandModelSettingsribbon
commandgroups,andshowswhentheyareenabled,andwherethey
appear.
Group Purpose When
enabled
Tray
Settings
Ribbon
Model
Settings
Ribbon
Settingdisplay
colors.
Always.
Selecting
perspectiveand
zoomlevel.
Modelsareon
thebuildtray.
Choosetoselect
aplane.
Modelsareon
thebuildtray.
Changethe 
perspectiveof
theactivepane.
Modelsareon
thebuildtray.
Printing
material.
Undoingor
redoingactions.
Afteran
actionor
object
selection.
Estimatingthe
amountof
printing
materials
required.
Buildtrayis
notempty.
Openingand
savingfiles.
Modelsare
notselected
.