SummaCut cutter User’s Manual
A self-healing orange strip helps avoid any damage to the knife tip
when no media has been loaded. Since cutting is done on the cutting strip, it is
essential that the strip remains intact.
A media sensor behind the right sleeve is used to detect the end of
the loaded media.
Only available on smaller models. Prevents the media from slipping
under the cutter when installed on a table.
Screws to secure the cutter base:
Make sure all screws are secured at each side
before the cutter is used.
The stand and linen media basket come standard with all D120, D140
and D160 models (except model D140
).
To Next Page
Loading...
