Svantek SVAN 971 - Page 114

SVAN 971 User Manual – Appendixes
114
Detector type in profile n
C
C0:n - IMPULSE detector in profile n
C1:n - FAST detector in profile n
C2:n - SLOW detector in profile n
SLM, 1/1OCTAVE, 1/3OCTAVE, RUNNING LEQ
functions:
n: 1, 2, 3 – Profile Number: 1, 2 or 3
DOSE functions:
n: 4, 5, 6 – Profile Number: 1, 2 or 3
Filter type in 1/1 OCTAVE analysis and
1/3 OCTAVE analysis
f
f1 - Z filter
f2 - A filter
f3 - C filter
Logger type in profile n
B
Bx:n - x - sum of the following flags
flags:
1:n - logger with Lpeak values in profile n
2:n - logger with Lmax values in profile n
4:n - logger with Lmin values in profile n
8:n - logger with Leq values in profile n
16:n - logger with LAV values in profile n
32:n - logger with LR15 values in profile n
64:n - logger with LR60 values in profile n
Storing the results of 1/1 OCTAVE
analysis and 1/3 OCTAVE analysis in
logger’s file
b
bx - x - sum of the following flags
flags:
1 - logger with Lpeak values
8 - logger with Leq values
Logger step
d
dnns - nn number in seconds (1  60)
dnnm - nn number in minutes ( 1  60)
Integration period
D
D0 - infinity (measurement finished by
pressing the Stop or remotely - by sending
S0 control code)
Dnns - nn number in seconds
Dnnm - nn number in minutes
Dnnh - nn number in hours
Repetition of the measurement cycles
(RepCycle)
K
K0 - infinity (measurement finished by
pressing the Stop or remotely - by sending
S0 control code)
.....................
Knnnn - nnnn number of repetitions (1  1000)
Detector type in the LEQ function
L
L0 - LINEAR
L1 - EXPONENTIAL
Measure Triggering mode
(TriggerMode)
m
m0 - switched off (OFF)
m2 - SLOPE +
m3 - SLOPE –
m4 - LEVEL +
m5 - LEVEL –