Svantek SVAN 971 - Page 120

SVAN 971 User Manual – Appendixes
120
001 – Ld result
010 – Le result
011 – Lde result
100 – Ln result
101 – Lnd result
110 – Len result
111 – Lden result
7
RepCycle
repetition cycle:
0 - infinity
nnnn - number of repetitions (1  1000)
8
NofChannel
number of channels (1)
8
NofProf
number of profiles (3)
10
StartDelay
start delay time
11..12
IntTimeSec
integration time specified in seconds
13
InterfaceMode
user interface mode:
0 - START/STOP,
1 - SIMPLE,
2 - ADVANCED,
14
LeqInt
detector's type in the Leq function:
0 - LINEAR,
1 - EXPONENT.
15
SpectrumFilter
1/1 or 1/3 OCTAVE analysis filter:
1 - Z,
2 - A,
3 - C
5 – B
in other cases:
Reserved
16
SpectrumBuff
1/1 or 1/3 OCTAVE logger:
sum of the following flags:
1 - logger with Lpeak values
8 - logger with Leq values
in other cases:
reserved
17
ExposureTime
exposure time: 1..720 (min)
18
Leq & Lav
the method of viewing results Leq and Lav
0 - Both
1 - Mutually exclusive (visibility depends of the EXCHANGE
RATE parameter)
19
MicComp
compensating filter for microphones:
0 - switched off,
1 - switched on
20
SpectrumRMSDetector
spectrum RMS detector type:
0 - LINEAR,
1 - FAST,
2 - SLOW
21
Reserved
reserved
22
CriterionLevel[0]
the 1
st
profile criterion level (only DOSE METER):
60, 65, 70, 75, 80, 84, 85, 87, 90 (*10 dB)