File manager
The File Manager is used for checking content of the
memory and operations on files and directories such as:
renaming, deleting, displaying information and creating of
new directories.
The SD Card memory is organised as a standard
memory with directories and sub-directories (FAT32 file
system). It is possible to create or to delete directories.
The content of the memory can be checked with the help
of the File Manager position in the File section.
Automatic logger files saving
Logger files are saved automatically to the SD-card. To enable automatic saving several conditions
should be fulfilled:
1. SD-card should be inserted and there should be enough space on it.
2. The Logger (path: <Menu> / Measurement / Logging / Logger Set.) should be switched on.
3. The new file should be defined with a unique name (path: <Menu> / Measurement / Logging /
Logger Set. / Logger Name).
Files are saved in the directory, which was set up as a working directory. The default working directory
(after using Factory Settings function) is called SVANTEK.
Note: During the measurement run with data logging to the logger file, the “curve” icon is
displayed.
The file name (Logger Name) is generated automatically using a pattern LLdd,
where LL is the string of letters (so called prefix) and dd is a string of digits that
forms a number. Up to 8 characters can be used to name a file.
The default prefix for the logger files is L.
The instrument assigns an individual counter to each prefix of files the user has
created and saved in the working directory. This counter is equal to the maximum
number in the set of files with the same prefix. For example, if there are files with
names: L0, L15 and L16, the counter value is 16.
The number of the new automatically created file will have the value of the counter
increased by one. So, for the above example, new file name will be L17.
You can change the automatically generated file name in
the special screen, which is opened after pressing the
◄ / ► key.
After changing file name number without changing the
prefix and pressing <Enter>, the counter will be
automatically adjusted.
The instrument accepts only that name which number is
higher than the counter of the prefix.
To Next Page
Loading...
