The instrument will start to warm up during 30 seconds before the measurement
start time 22:00 on the nearest Monday.
The measurement will be performed by a period of ten minutes. Then, the results
will be saved in the file with the name R1 automatically and the instrument will be
waiting for the next Monday to start measurement at 22.00. Next file will be
automatically named R2 and so on.
Such cycle will be repeated so many times as is defined by Max days parameter.
If more than one day in a week is selected, every performed measurement will
increase the day-counter. The measurement cycle stops when the day-counter
number is equal to Max days. If Inf value is selected the measurement cycles can
be stopped only by the user (of course, if the power is assured).
To Next Page
Loading...
