- 155 -
6.6.9.2.1.3 Printer ID Setting
This setting is required to identify each printer for wireless communication.
P R I N T E R I D
Ø ØØØ1
Setting of 1st digit (0 to 6)
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine
the value. (Moves to the next digit.)
P R I N T E R I D Ø
Ø ØØ1
Setting of 2nd digit (0 to 9) *
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine
the value. (Moves to the next digit.)
P R I N T E R I D Ø Ø
Ø Ø1
Setting of 3rd digit (0 to 9)
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine
the value. (Moves to the next digit.)
P R I N T E R I D Ø Ø Ø
Ø 1
Setting of 4th digit (0 to 9)
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine
the value. (Moves to the next digit.)
P R I N T E R I D Ø Ø Ø Ø
1
Setting of 5th digit (0 to 9)
[POWER]
Press the [POWER] key to determine
the value.
< 8 > I / F S E T T I N G
System mode menu display
(Interface setting)
* The value to be entered is limited depending on the number entered in each digit because the printer
ID range is 00000 to 65535.
For example:
If 1st digit=6, 2nd digit must be 1 to 5.
If 1st digit=6 and 2nd digit=5, 3rd digit must be 1 to 5.
If 1st digit=6, 2nd digit=5, and 3rd digit=5, 4th digit must be 1 to 3.
If 1st digit=6, 2nd digit=5, 3rd digit=5, and 4th digit=3, 5th digit must be 1 to 5.
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
To Next Page
Loading...
