Toshiba B-EP Series - Page 56

- 47 -
(3) LED check
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE]
(4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[POWER]
(6) Press the [POWER] key.
M A I N T E N A N C E C O N T
(7) Print mode for maintenance counter values
and various parameter values
[PAUSE]
(8) Press the [PAUSE] key.
A U T O D I A G N O S T I C
(9) Automatic self-test mode
[PAUSE]
(10) Press the [PAUSE] key.
H E A D C H E C K
(11) Print head check for broken dots mode
[PAUSE]
(12) Press the [PAUSE] key.
L E D C H E C K
(13) LED check mode
[POWER]
(14) Press the [POWER] key.
C H E C K I N G
(15) Start of LED check
LEDs turn on.
< 1 > D I A G N O S T I C
(16) System mode menu display (Self-test)
LED lighting pattern
STATUS LED: Turns on for 3 sec. (green)
↓
STATUS LED: Turns off
↓
STATUS LED: Turns on for 3 sec. (red)
↓ ↓
STATUS LED: Turns off CHARGE LED: Turns on for 3 sec. (orange)
↓ ↓
STATUS LED: Turns on for 3 sec. (orange) CHARGE LED: Turns off
↓
STATUS LED: Turns off
↓