Safety instructions
11/2020 243343V03_EN 7
1.5.5 Safety instructions for this machine
The following safety instructions refer particularly to this machine:
Do not lift the machine at the knife box.
The machine must not be operated for a prolonged period without prod-
uct.
If the seals in the knife box or in the cutting chamber are damaged, a
breeding ground for bacteria can form in the interior of the machine.
Check the seals after every cleaning routine. Arrange for defective
seals to be replaced immediately.
The hydraulic oil can heat up to 70 °C. Let it cool down before you per-
form an oil change or check the oil level.
Hydraulic oil must never get into the waste water system. Collect es-
caping hydraulic oil.
Dispose of used oil filters and cleaning cloths smeared with oil properly.
Only the product may be placed and transported on the conveyor belt.
To Next Page
Loading...