Maintenance overview
11/2020 243343V03_EN 61
6.1 Maintenance overview
Component/assembly Interval Activity see page
daily
quarterly
annually
every 3000 hours
every 4 years
Power cord and plug X Visual inspection; replace in the case of damage
Cut-off knife X
Check for wear
Sharpen blunt knives
Replace damaged knives
page 62
page 62
Grid blades X
Check for wear
Sharpen blunt knives
Replace damaged knives
page 63
page 38
page 41
Grid side walls X Check for wear; if necessary replace grid side walls page 64
Seals on the knife and
grid shaft
X
Visual inspection: notify customer service if damaged or
leaking
page 23
Seals on feed cylin-
der,
X
Visual inspection: notify customer service if damaged or
leaking
page 23
Rollers X
Check running surfaces for wear, replace rollers if nec-
essary
page 64
X Check free running and play: replace sluggish rollers page 64
Discharge conveyor X Visual inspection: tension belt that slips or runs crooked page 69
Safety switches for
the safety equipment
X Function test page 55
Cooling air hose X Clean or replace page 65
Hydraulic oil First oil change after 300 h page 66
X Check oil level page 65
X Regular oil change page 66
Hydraulic hoses
X Visual inspection: replace porous or damaged hoses
X Replace
To Next Page
Loading...