9
2. Operation
This chapter is intended for the operator and all persons who work on or
with the machine.
Here, you will find basic safety instructions and other general information
that must be observed for safe and careful handling of the machine.
This chapter covers the following:
Machine overview ................................................................................. 10
Before you start... ................................................................................. 13
Notes about cutting............................................................................... 14
Cutting .................................................................................................. 17
If any malfunction occurs ...................................................................... 19
Safety instructions for operation
Note:
The owner must compile an operating instruction that sets out
the responsibilities for working on and with the machine.
Risk of injury on the upright knife!
If you open any cover or the knife box lid during a running cut-
ting operation, the machine will switch off and the knife will stop
immediately. The knife can come to a standstill in the chamber.
You can injure yourself on the upright knife.
To Next Page
Loading...