Chapter 8: DICOM 00.053.129, Revision C SonixTablet Service Manual
8-10
Table 8-7: DICOM Print Settings – AE Configuration
Devices
Use the Devices option to add as many DICOM Print Servers as required.
Note: If more than one DICOM Print Server is configured, during data transfer the Operator has the option of
selecting which Print Server(s) will receive the data.
Name
Enter/select the Name of an AE Print Device and populate the three (3) AE fields: AE Title, IP
Address and Port.
Add Select to Add the new AE Print Device.
Delete Select to Delete the selected AE Print Device.
Test Select to send verification request to DICOM Print Device (ping to verify connection).
Settings...
Select to access Print Settings (Figure 8-9 and Table 8-8) and Advanced Print Settings (Figure
8-10 and Table 8-9).
Application
Entity (AE)
Note: The data entered/edited for the next three (3) fields is specific to the selected Device Name.
AE Title AE Title of the Print SCP.
IP Address Unique identifier of Print SCP.
Port Listening Port of the Print SCP.
Insert (Symbol)
Enables the insertion of text symbol(s) not available on the keyboard (e.g., punctuation, symbols and
letters from other languages).
To Next Page
