Ultrasonix SonixTouch Q+ - Page 78

Chapter 7: Field Service Components 00.053.204, Revision A SonixTouch Q+ Service Manual
7-22
35 HDMI Connector
Connects to the LCD display.
Note: The LCD display must be connected to this specific HDMI connector or the
display will not work.
36 HDMI Connector Connects to the DVI connector on the Back Connectivity Panel.
37 HDMI Connector Not in use.
38 USB Port Used by the optional SonixGPS (when applicable). (May or may not be present.)
39 USB Port
Not in use. (May or may not be present.)
OR
Used by the optional ECG module USB connection (when applicable).
40 USB Port
Not in use. (May or may not be present.)
OR
Used by the optional USB printer (when applicable).
41 Display Port
Not in use. (May or may not be present.)
OR
Used by the optional ECG module (when applicable).
42 RS232 Serial Port Not in use. (May or may not be present.)
43 RS232 Serial Port Not in use. (May or may not be present.)
44 RS232 Serial Port Not in use. (May or may not be present.)
Power Hub
A
Power Connector
with 3-Way Adapter
OR
with 4-Way Adapter
Used by the Speakers (1), ECG (2) and LED-lit Ultrasonix logo (3).
B
Power Switch
(with Splitter Bias Cable)
Used by the system ON/OFF switch as well as for UPS power.
C Speaker Power Connector Used by the system speakers.
D 5V Power Connector Not in use.
E 5V Power Connector Not in use.
F 5V Power Connector Used by the LED-lit Ultrasonix logo.
G 5V Power Connector Used by the optional ECG module (when applicable).
H 5V Power Connector Used by the optional SonixGPS (when applicable).
I 12V Power Connector Used by the optional SonixGPS (when applicable).
J 12V Power Connector Not in use.
K System Power Switch Used as the ON/OFF switch by the operator console.
2
1
3
2
13