usi M9000 - Figure 3-14 Phase Drop-Down Menu

89
o All
Checking this box (All ) will select all the analog input channels to be modified
simultaneously using the Edit Assistance bar.
• Channels#
This column displays the analog channel number for each physical input.
• Description
This column displays the alpha-numeric description entered for each analog input. The description
is limited to 64 characters.
• Phase
This column is used to select the input phase being monitored from the input source. This
information will be used by the wizard tool to automatically assign these channels to a Line Group
(see Section 3.1.3).
Figure 3-14 Phase Drop-down Menu
o NA:
This selection indicates Not Applicable.
o A:
This selection indicates that the analog input being monitored is phase A of the power
system.
o B:
This selection indicates that the analog input being monitored is phase B of the power
system.
o C:
This selection indicates that the analog input being monitored is phase C of the power
system.
o N:
This selection indicates that the analog input is the neutral phase of the monitored circuit.
• Input Type
This drop-down menu is used to select the channel type for each analog input. This information will
be used by the wizard tool to automatically assign these channels to a Line Group (see Section
3.1.3).