usi M9000 - Figure 2-31 Continuous Data Table

63
Figure 2-31 Continuous Data Table
o Export ID:
This column displays the identification number for the analog measurement in
each row. The measurements displayed in this table have been selected for export
in the Measurements Configuration (see Section 3.1.4).
o Export Name:
This column displays the description of the measurement as entered in the
Measurements page of the DME configuration.
o Start Date/Time:
This column displays the beginning date and time of the recorded data.
o End Date/Time:
This column displays the ending date and time of the recorded data.
• Date-Time Filter
This panel is used to select a time-slice of continuous data to be displayed. To display this
panel, select a row in the Continuous Data table.