37
• JP7
This jumper programs the output of relay four which is the COMMUNICATION alarm. Jumper these
pins to configure this relay to be normally open (open on alarm).
• JP8
This jumper programs the output of relay four which is the COMMUNICATION alarm. Jumper these
pins to configure this relay to be normally closed (close on alarm).
• JP9
This jumper programs the output of relay five which is the POWER alarm. Jumper these pins to
configure this relay to be normally open (open on alarm).
• JP10
This jumper programs the output of relay five which is the POWER alarm. Jumper these pins to
configure this relay to be normally closed (close on alarm).
• JP11
This jumper programs the output of relay six which is the DISC alarm. Jumper these pins to
configure this relay to be normally open (open on alarm).
• JP12
This jumper programs the output of relay six which is the DISC alarm. Jumper these pins to
configure this relay to be normally closed (close on alarm).
• JP13
This jumper programs the output of relay seven which is the TEMPERATURE alarm. Jumper these
pins to configure this relay to be normally open (open on alarm).
• JP14
This jumper programs the output of relay seven which is the TEMPERATURE alarm. Jumper these
pins to configure this relay to be normally closed (close on alarm).
• JP15
This jumper programs the output of relay eight which is unused. Jumper these pins to configure
this relay to be normally closed (close on alarm).
• JP16
This jumper programs the output of relay eight which is unused. Jumper these pins to configure
this relay to be normally open (open on alarm).
• JP17
This jumper is not used.
• JP18
This jumper is not used.
To Next Page
Loading...