VEMAG HP12E - Service

HP10E / HP12E / HP15E / HP20E - Dairy design 6. Graphical control
6-63© VEMAG 2013
6.8 Service
This section describes the Service page to which there is general access.
• What information is displayed?
6.8.1 Service pages
On the Service pages you will nd general information about the version
of the terminal, the drive controllers and the ller.
Make a note of the current version numbers so that you can quote them
in the event of a VEMAG Customer Service query.
The operating hours which have been clocked up are shown at the
bottom of the page.
Warning!
Put a tick in the corresponding eld when you carry out a service.
This sets the date for the next service. If no tick is put in the eld,
the message "00850 Perform maintenance!" will appear each time
the machine is started up.
You have read-only access to all the Service pages. The Service pages
are released by the userkey.
Section 6.5.6