VEMAG HP12E - 6.6.3.11 Pressure control

HP10E / HP12E / HP15E / HP20E - Dairy design6. Graphical control
6-30 © VEMAG 2013
6.6.3.10 Portions per minute
Display: Portions per minute
Unit: Number
Resolution: 0.1
Setting range: 1.0 – speed limit
Application: Cutter / continuous cutter / continuous PPM
• Enter the portions per minute.
• Press Enter.
6.6.3.11 Pressure control
Display: Pressure control
Unit: Bar [bar]
Resolution: 0.1 bar
Setting range: 0.1 – 20 bar / per analogue input
Application: All applications requiring a constant lling pressure
• Enter feed pressure to be maintained during lling.
• Press Enter.
After the knee lever has been actuated, the machine starts lling the pipe
system. The message "System being lled" is displayed. Pressure control
is switched off as soon as the hopper has been emptied. The message
"Hopper empty?" appears in the display.