VEMAG HP12E - Knee Lever; Adjustable Feet; Front Door

HP10E / HP12E / HP15E / HP20E - Dairy design2. Description
2-6 © VEMAG 2013
2.2.6 Knee lever
The lling process is switched on and off using the knee lever. It can be
adjusted to suit the height and location of the operator.
Section 4.7
2.2.7 Step
At the front of the machine is a step which allows the operator to ll the
hopper or get at it for cleaning and maintenance purposes.
Danger!
There is a risk of crushing when folding the step in and out. Proceed with
extreme caution when folding the step in and out to prevent injury.
2.2.8 Adjustable feet
To compensate for uneven oors, the machine is tted with adjustable
feet. The height of the machine can be adjusted by up to 80 mm (outlet
height 1,000 mm to 1,080 mm).
Section 3.2
2.2.9 Front door
The front door of the machine can be swung right open for maintenance
work.