VEMAG HP12E - 6.5.3 Select mode group, mode and view

HP10E / HP12E / HP15E / HP20E - Dairy design 6. Graphical control
6-15© VEMAG 2013
6.5.3 Select mode group, mode and view
In the Operating mode eld you can select mode group and mode and set
the view required for each application. The modes which can be selected
are determined by the machine type and the machine conguration.
You can also save settings here and select the Service pages and your
language.
• Press the Operating mode function key.
• Select the Operating mode group eld using the cursor key.
• Press Enter. A list of the possible mode groups is displayed.
• Select the mode group using the Cursor keys.
• Press Enter.
• Select the Operating mode eld using the cursor key.
• Press Enter. A list of the possible modes is displayed.
• Select the mode using the cursor keys.
• Press Enter.
• Select the View eld using the cursor key.
• Press Enter. A list of the possible views and supplementary
parameters for the selected mode is displayed.
• Select the view using the cursor keys. Views followed by ".." show that
more pages follow.
• Press Enter.
To set your language
Section 6.5.5