VEMAG HP12E - Index

HP10E / HP12E / HP15E / HP20E - Dairy design Index
i© VEMAG 2013
Index
Declaration of conformity
0. Foreword 0-1
1. Safety instructions 1-1
1.1 Sphere of application 1-1
1.2 Use in accordance with purpose 1-1
1.3 Explanation of symbols 1-2
1.4 General safety instructions 1-3
1.5 Special safety instructions 1-4
2. Description 2-1
2.1 Overview HP10E / HP12E / HP15E / HP20E 2-1
2.2 Brief description 2-1
2.2.1 Hopper 2-1
2.2.2 Feed screw 2-2
2.2.3 Double screws 2-2
2.2.4 Filling horn holder 2-3
2.2.5 Controls 2-4
2.2.6 Knee lever 2-6
2.2.7 Step 2-6
2.2.8 Adjustable feet 2-6
2.2.9 Front door 2-6
3. Installation and commissioning 3-1
3.1 Transporting the machine 3-1
3.2 Setting up the machine 3-3
3.3 Electrical connection 3-4
3.4 Checking direction of rotation 3-5
4. Setting up 4-1
4.1 General information 4-1
4.2 Fitting the double screw housing 4-1
4.3 Fitting the double screws 4-3
4.4 Fitting the lling horn holder 4-4
4.5 Setting the vacuum 4-5
4.5.1 Filling liquid products 4-5
4.6 Fitting the scraper 4-6
4.7 Adjusting the knee lever 4-7
5. Operation 5-1
5.1 Working with the machine 5-1
5.2 Working with provisional drive 5-3
6. Graphical control 6-1
6.1 Control panel 6-3
6.2 Screen 6-5
6.2.1 Header 6-5
6.2.2 Program and mode 6-5
6.2.3 Basic parameters 6-5
6.2.4 Supplementary parameters 6-5
6.2.5 Footer 6-5
6.3 Keypad 6-7
6.3.1 Numerical keypad 6-7
6.3.2 Key C (Cancel) 6-7
6.3.3 Screen up/down keys 6-7
6.3.4 Padlock key 6-7
6.3.5 Plus/minus keys 6-7
6.3.6 Cursor keys 6-7
6.3.7 Enter key 6-7
6.4 Status and error messages 6-8
6.5 Principles of operation 6-9
6.5.1 Select and edit programs 6-11
6.5.2 Importing and exporting programs using a USB stick 6-13
6.5.3 Select mode group, mode and view 6-15
6.5.4 Select start/stop method 6-17
6.5.5 Make settings (language, date/time, password) 6-19
6.5.6 Set up userkey 6-21
6.6. Mode groups, modes, start/stop methods and parameters 6-23
6.6.1 Mode groups, modes and views 6-24