HP10E / HP12E / HP15E / HP20E - Dairy design 5. Operation
5-3© VEMAG 2013
5.2 Working with provisional drive
Should the portioning computer of the machine fail, it is possible to conti-
nue operating the machine using provisional drive. In this mode, you can
run the machine hopper empty at approx. 50 % of nominal speed.
Danger!
The front door of the machine must be swung open to run the hopper
empty.
Risk of crushing, dragging in and burns.
Proceed with extreme caution and do not reach into the inside of the
machine.
• Press the OFF key on the machine control panel.
• Switch off the main switch of the machine.
• Swing open the front door.
Section 8.1
• Switch the main switch of the machine back on.
• Press the ON key on the machine control panel.
• Press push-button S10 on the switch cabinet for the drive controller
and keep it depressed until the hopper of the machine has run empty.
• Inform VEMAG Customer Service.
• Press the OFF key on the machine control panel.
• Switch off the main switch of the machine.
To Next Page
Loading...
