HP10E / HP12E / HP15E / HP20E - Dairy design 6. Graphical control
6-11© VEMAG 2013
6.5.1 Select and edit programs
In the Program eld you can select, edit, copy and delete lling
programs and also enter product names for the individual programs.
Program numbers 0 to 99 are available.
• Press the Program function key.
• Enter the program number using the numerical keypad.
• Press Enter.
• Select the eld for product name using the bottom cursor key.
• Press Enter. A list of the existing programs appears. Below the list
are six keys for selecting the desired action: New/Delete/Copy/Edit/
Select/Cancel.
• Select the action using the left/right cursor keys.
• Press Enter.
A keyboard is shown for you to enter the product name.
• Enter product name. Letters and numbers are marked using the
four cursor keys and adopted by pressing Enter.
• Press Enter on the keypad. The keyboard is hidden again and the
product name is adopted.
To Next Page
Loading...
