VEMAG HP12E - 6.5.6 Set up userkey

HP10E / HP12E / HP15E / HP20E - Dairy design 6. Graphical control
6-21© VEMAG 2013
6.5.6 Set up userkey
Access to certain functions can be blocked with the aid of the userkey.
The userkey has ve different user types:
• Program locking (switch programs, enter weight corrections and per-
form a linking horn test)
• Advanced user (set up and modify programs)
• Professional user (optional)
• Service (congure the machine)
• Superuser (full access)
If you want to prevent programs being modied or deleted by accident,
you should set up the "Program locking" user type. You need to log on as
a Service user to do this.
• Press the padlock key.
• Select user Service by using the relevant password.
• Press Enter.
• Press Change. A „0“ shows that program locking is not active.
• Enter your password using the numerical keypad (max. 8 digits).
• Press Enter.
• Press Close. A red padlock next to the program number shows that
the program locking is active.
You can briey unlock the program using the program locking password.
Use the password „0“ to activate program locking again.
If you want to unlock the program denitively, you need to log on as a
Service user again and reset the program locking password to „0“.