VEMAG HP12E - Working with the Minced Meat Line and Forming Machine; Weight Groups; Group Position

HP10E / HP12E / HP15E / HP20E - Dairy design6. Graphical control
6-48 © VEMAG 2013
Working with the minced meat line and forming machine
6.6.4.43 Weight groups
Display: Weight groups
Unit: Number
Resolution: 1
Setting range: 0 (=off) – 99
Application: Forming machine FM 250 (kebab production)
• Enter the number of weight groups (e.g. number of kebab sticks)
to be produced simultaneously.
• Press Enter.
Here you dene the number of products (e.g. kebab sticks) to be produced
simultaneously. Total weight is calculated automatically and displayed.
The correction value can be entered in grams under „Total weight“.
Section 6.6.3.3
6.6.4.44 Group position
Display: Group position
Unit: Number
Resolution: 1
Setting range: 1 – number of group portions
Application: Forming machine FM 250 (kebab production)
The group position is displayed automatically once the individual portion
weights have been entered. Enter a "1" here to start a new group
(e.g. a new stick) when the machine re-starts.
If, after 4 seconds, you want to go back to the rst portion, use the Enter
key to put a tick in the “Auto reset” eld.