VIDEOJET DataFlex 6530 - Page 133

B-10 Videojet DataFlex 6530 Service Manual - Rev AA
HELD
The command response string is:
<packmlstatestring><CR>
Examples
>>PML|GST|<CR>
<<9<CR>
The printer is in the HELD state.
>>PML|GSX|<CR>
<<HELD<CR>
The printer is in the HELD state.
>>PML|ABT|<CR>
<<ACK<CR>
The PackML Abort command was successfully executed.
>>PML|GSX|<CR>
<<ABORTED<CR>
Confirmation that the printer is now in the ABORTED state.
>>PML|PRE|<CR>
<<ERR<CR>
The PackML Prepare command was unsuccessful because the printer is in the ABORTED state.
>>PML|STP|<CR>
<<ACK<CR>
The PackML Stop command successfully cleared the Abort error and moved the printer to the
STOPPED state.
>>PML|PRE|<CR>
<<ACK<CR>
The PackML Prepare command successfully moved the printer to the READY state.
>>PML|STA|<CR>
<<ACK<CR>
The PackML Start command successfully moved the printer to the STANDBY state.
>>PML|HLD|<CR>
<<ACK<CR>
The PackML Hold command successfully moved the printer to the HOLDING state.
>>PML|GSX|<CR>
<<HELD<CR>
The printer is in the HELD state.