INFORMATION
B2420, WSM
I-6
3. SPECIFICATIONS
• *Manufacture's estimate
The company reserves the right to change the specifications without notice.
9Y1210436INI0001US0
Model B2420
PTO power* 14.3 kW (19.4 HP)*
Engine
Maker KUBOTA
Model D1105-D22I
Type E-TVCS, liquid-cooled, 3-cylinder diesel
Number of cylinder 3
Bore and stroke 78.0 × 78.4 mm (3.07 × 3.09 in.)
Total displacement 1123 cm
3
(68.53 cu.in.)
Engine gross power* 17.9 kW (24.0 HP)*
Rated revolution 2600 min
-1
(rpm)
Maximum torque 70 N·m (52 Ibf·ft)
Battery 55B24L(S)-MF
Capacities
Fuel tank 26 L (6.9 U.S.gals, 5.7 Imp.gals)
Engine crankcase
(with filter)
3.1 L (3.3 U.S.qts, 2.7 Imp.qts)
Engine coolant 3.9 L (4.1 U.S.qts, 3.4 Imp.qts)
Transmission case 14 L (3.7 U.S.gals, 3.1 Imp.gals)
Dimensions
Overall length (with 3P) 2410 mm (94.88 in.)
Overall width 990 to 1331 mm (39.0 to 52.40 in.)
Overall height
(Top of
ROPS)
Rear mount
ROPS type
2300 to 2350 mm (90.56 to 92.51 in.)
Mid mount
ROPS type
2030 to 2055 mm (79.9 to 80.9 in.)
Wheel base 1563 mm (61.54 in.)
Minimum ground clearance 267 to 313 mm (10.6 to 12.3 in.)
Tread
Front 797 to 815 mm (31.4 to 32.0 in.)
Rear 734 to 1088 mm (28.9 to 42.83 in.)
Weight 722 to 748 kg (1600 to 1640 lbs)
Clutch Dry single plate
Travelling
system
Tires
Front 6-12
Rear 9.5-16
Steering Integral type power steering
Transmission Gear shift, 9 forward and 3 reverse
Brake Wet disk type
Min. turning radius
(with brake)
2.1 m (6.9 feet)
Hydraulic unit
Hydraulic control system Quarter inching valve
Pump capacity
3P: 16.6 L / min (4.39 U.S.gals / min, 3.65 Imp.gals / min)
Power steering: 9.8 L / min (2.6 U.S.gals / min., 2.2 Imp.gals / min)
3-point hitch SAE Category 1
Max. lift force
At lift points 615 kg (1360 lbs)
600 mm
behind lift
point
480 kg (1060 lbs)
PTO system Rear PTO
Shaft SAE 1-3/8, 6 splines
PTO / Engine
speed rpm
540 min
-1
(rpm) at 2600 min
-1
(rpm), 960 min
-1
(rpm) at 2552 min
-1
(rpm)
To Next Page
Loading...
