wsm B2420 - Separating Power Steering Controller Assembly

STEERING
B2420, WSM
7-S9
(2) Separating Power Steering Controller Assembly
Bonnet, Front Grille, Side Cover and Battery Negative Cable
1. Open the bonnet (2) and remove the front grille (1).
2. Disconnect the battery negative cable (4).
3. Disconnect the head light connectors, horn connectors and
remove the bonnet (2).
4. Remove the side covers (3).
NOTE
• When disconnecting the battery cables, disconnect the
negative cable (4) first. When connecting, positive cable
first.
9Y1210436ENS0020US0
Steering Wheel
1. Remove the steering wheel cap.
2. Remove the steering wheel mounting nut and remove the
steering wheel (1) with a steering wheel puller (2).
(When reassembling)
9Y1210436ENS0024US0
(1) Front Grille
(2) Bonnet
(3) Side Cover
(4) Battery Negative Cable
Tightening torque
Steering wheel mounting
nut
30 to 49 N·m
3.0 to 5.0 kgf·m
22 to 36 lbf·ft
(1) Steering Wheel (2) Steering Wheel Puller
KiSC issued 06, 2012 A