X-Rite 962 - Setting Instrument Configuration; General Information; Language

962/964
SPECTROPHOTOMETER
4-1
4. Setting Instrument Configuration
General Information 4-1
Language 4-1
Measure Options 4-2
Color Options 4-5
Database Tools 4-11
Hardware Setup 4-15
Main Menu Options 4-24
Load Factory Defaults 4-24
General Information
The Configuration menu consists of a series of settings that allow
you to customize your instrument for your particular application.
To open the Configuration menu:
1. Repeatedly press the Tab Down @ key to highlight
Configuration. Press the Enter key # to access the
Configuration Menu.
–MAIN MENU–
↑
Calibrate
Standards
Projects
Run Job
X—Rite
964
——————
XXXX
******
Language
The Language configuration allows you to select the language
you want to display on your instrument. The instrument resets
whenever the language is changed.
To select a language:
1. Use the Tab keys $@ to highlight Language.
2. Press the Enter # key to access the
Language editor.
Configuration
Language :English
Measure Options...
Color Options...
Database Tools...
Hardware Setup...
Main Menu Options...
3. Use the Tab keys $@ to highlight the desired language.
4. Press the Enter key # to save the selected language. The
instrument restarts with the selected language active.
Confi
g
uration
English, Deutsch,
Español, Francais,
Italiano, Português