X-Rite 962 - Beeper; Clock Adjust

CHAPTER FOUR
4-20
Beeper
To access the Beeper Options:
1. Use the Tab keys $@ to highlight Beeper.
Hardware Settings
Serial Port :9600
Read Oper. :Switch
Cal Timeout :24 hrs
Power Down :120 sec
Beeper :Soft
↓
2. Press the Enter # key to open the Beeper menu.
3. Use the Tab keys $@ to highlight the desired beeper volume:
Loud, Medium, Soft, or Off. Press the Enter # key to
save your setting and return to the Hardware Settings
Options menu.
Clock Adjust
To access the Clock Adjustment:
1. Use the Tab keys $@ to highlight Clock Adjust.
Hardware Settings
↑
Cal Timeout :24 hrs
Power Down :120 sec
Beeper :Soft
Clock Adjust: 8:21
Display :Right
2. Press the Enter # key to open the Clock Adjust menu.
Clock Adjust
Date Format:M/D/Y
Month : 2
Day :19
Year :2001
Hour : 8
Minute :21
Date Format Selection
1. Use the Tab keys $@ to highlight
Date Format and press
the Enter # key.
2. Use the Tab keys $@ to highlight the desired date format:
M/D/Y, Y/D/M or D/M/Y. Press the Enter # key to save
your setting and return to the Clock Adjust menu.