X-Rite 962 - Δecmc Factors; ΔE94 Factors

SETTING INSTRUMENT CONFIGURATION
4-9
2. Use the Tab keys $@ to highlight the desired combination:
A2, A10, etc. Press the Enter # key to save your setting
and return to the Metamerism menu.
ΔEcmc Factors
To access the ΔEcmc Factors:
1. Use the Tab keys $@ to highlight ΔEcmc Factors.
Color Options
↑
Opacity :Color
Strength :Tristimu
Metamerism :MI
Δ Ecmc Factors...
↓
2. Press the Enter # key to access ΔEcmc Factors options.
ΔEcmc Factors...
Lightness : 2.00
Chromaticity : 1.00
3. Use the Tab keys $@ to highlight desired attribute. Press the
Enter # key to access the
Set ΔEcmc Factor editor.
4. Use the Tab keys $@ to choose the desired digit (arrows
above and below designate selection). Press the Enter key
# to access the alphanumeric editor.
NOTE: Highlighting CLEAR and pressing the Enter key # is a quick
method to zero the value.
5. Use the Tab keys $@ to highlight the desired number and
press the Enter # key to exit the editor.
6. When editing is complete, use the Tab keys $@ to highlight
Save & Exit and press the Enter # key.
ΔE94 Factors
To access the ΔE94 Factors:
1. Use the Tab keys $@ to highlight ΔE94 Factors.
Color Options
↑
Strength :Tristimu
Metamerism :MI
Δ Ecmc Factors...
Δ E94 Factors...
Shade Sort is Off
2. Press the Enter # key to access ΔE94 Factors options.