X-Rite 962 - Shade Sort; Database Tools

CHAPTER FOUR
4-10
ΔE94 Factors...
Lightness : 2.00
Chromaticity : 1.00
3. Use the Tab keys $@ to highlight the desired attribute. Press
the Enter # key to access the
Set ΔE94 Factor editor.
4. Use the Tab keys $@ to choose the desired digit (arrows
above and below designate the selection). Press the Enter
key # to access the alphanumeric editor.
NOTE: Highlighting CLEAR and pressing the Enter key # is a quick
method to zero the value.
5. Use the Tab keys $@ to highlight the desired number and
press the Enter # key to exit editor.
6. When editing is complete, use the Tab keys $@ to highlight
Save & Exit and press the Enter # key.
Shade Sort
To select the shade sort status:
1. Use the Tab keys $@ to highlight Shade Sort.
Color Options
↑
Strength :Tristimu
Metamerism :MI
Δ Ecmc Factors...
Δ E94 Factors...
Shade Sort is Off
2. Press the Enter # key to toggle between Off and On.
Database Tools
The Database Tools configuration allows you to determine the
following settings:
• View Tags – Used to view tags scanned into the
instrument, if applicable.
• Factory Presets – Allows you to reload the factory
default settings whenever required. All configuration
options and stored data will be lost.
• Clear all Databases – Allows you to clear all stored data
from the instrument. Configuration settings are not affected.
• Clear all Samples – Allows you to clear all stored samples.