CHAPTER FIVE
5-4
4. Use the Tab keys $ @ to highlight the desired color space
attribute. Press the Enter key # to open Edit Color
Data
menu.
5. Use the Tab keys $@ to choose the desired digit (arrows
above and below designate the selection). Press the Enter
key # to access the alphanumeric editor.
Edit Color Data:
CLEAR
↓
+000.0000
↑
Save & Exit
NOTE: Positioning the arrows above and below + or – and pressing
the Enter key # toggles between the two symbols.
6. Use the Tab keys $@ to highlight the desired number and
press the Enter # key to exit editor.
7. Continue with additional digit edits if required.
8. When editing is completed, use the Tab keys $@ to
highlight
Save & Exit and press the Enter # key.
9. Continue with additional attribute editing for the selected
color space.
10. When all attributes have been edited for the selected color
space, highlight Save and press the Enter key #.
11. If additional color space editing is required, repeat Steps 2
through 11. Up to 10 manual settings can be defined for
each standard.
NOTE: Highlighting Next and continually pressing the Enter key #
pages through the color space data that you have set.
Entering Standard Name
The standard name can consist of up to 20 characters, with the
first 10 displaying on the View Standard menu. The name is
entered using the alphanumeric editor.
To access standard name menu:
1. Use the Tab keys $@ to highlight Std Name.
To Next Page
Loading...
