X-Rite 962 - Active Functions

SETTING INSTRUMENT CONFIGURATION
4-5
Data Display – Select Over White, Over Black, or
Color at 100%.
Set k1 and k2 – Allows you to adjust the opacity
constant of k1 and k2.
• Strength – Determines the strength method and predicted
mode.
Method – Select Apparent, Chromatic, or Tristimulus
as the strength calculation.
Predicted is @ – Select 100% or MinΔE as the
predicted mode.
• Metamerism Index – Determines the metamerism mode
and Illuminant/Observer pairs used in calculating the
metamerism index.
Mode – Select MI or DIN6172 as the metamerism
mode.
IllObs1and IllObs2 – Select the illuminant observer
combinations (D65/2, D65/10, etc.).
• ΔEcmc Factors – Used to edit the Lightness and
Chromaticity values for the selected calculation.
• ΔE94 Factors – Used to edit the Lightness and
Chromaticity values for the selected calculation.
• Shade Sort – Allows you to enable (on) or disable the
shade sort capabilities used in the QA mode. Shade sort
options are accessed through the Standards mode and allow
setting the shade sort and box size.
To open the Color Options menu:
1. Use the Tab keys $@ to highlight Color Options.
CONFIGURATION
Language :English
Measure Options...
Color Options...
Database Tools...
Hardware Setup...
Main Menu Options...
2. Press the Enter # key to access the Color Options menu.
Active Functions
To enable or disable functions:
1. Use the Tab keys $@ to highlight Active Functions.