X-Rite 962 - Strength

SETTING INSTRUMENT CONFIGURATION
4-7
Opacity Menu
Data Display :Color
Set k1 :0.04
Set k2 :0.60
Data Display Selection
1. Use the Tab keys $@ to highlight Data Display. Press
the Enter # key to access the
Set Data Display editor.
2. Use the Tab keys $@ to highlight the desired data display:
Over Black, Over White, or Color at 100%. Press
the Enter # key to save your setting and return to the
Opacity menu.
Set k1 and k2 Constants
1. Use the Tab keys $@ to highlight Set k1 or Set k2.
Press the Enter # key to access the
Enter Const. editor.
2. Use the Tab keys $@ to highlight the desired digit (arrows
above and below designate the selection). Press the Enter
key # to access the alphanumeric editor.
NOTE: Highlighting CLEAR and pressing the Enter key # is a quick
method to zero the value.
3. Use the Tab keys $@ to highlight the desired number and
press the Enter # key to exit editor.
4. When editing is complete, use the Tab keys $@ to highlight
Save & Exit and press the Enter # key.
Strength
To access the Strength Options:
1. Use the Tab keys $@ to highlight Strength.
Color Options
Active Functions...
Active Illum/Obs...
Opacity :Color
Strength :Tristimulus
Metamerism :MI
↓
2. Press the Enter # key to access Strength options.