INSTRUMENT OPERATION MODES
6-3
Replacing the Battery Pack
1. Unplug the AC adapter and click the battery switch to Off.
2. Hold the shoe next to the instrument housing and lift
upward on the spring-loaded latch. Open the shoe
perpendicular to the instrument housing. Refer to
Unlatching the Instrument Shoe in Section One.
3. Carefully rotate the instrument over and rest it on its top.
4. Using your fingers, compress the two tabs located on both
sides of the battery pack and remove battery pack.
5. Slide a fresh battery pack into the compartment with the
battery connector facing down and to the back of the
instrument.
6. Press down on the pack until the connector is properly
seated and the tabs click into position.
Battery Connecto
To Next Page
Loading...
