X-Rite 962 - Diff Disp; Color Options

CHAPTER FOUR
4-4
Edit Averaging #
CLEAR
↓
01
↑
Save & Exit
3. Use the Tab keys $@ to highlight the averaging ##. Press
the Enter key # to access the alphanumeric editor.
4. Use the Tab keys $@ to highlight desired number and press
the Enter # key to exit editor.
5. Use the Tab keys $@ to highlight
Save & Exit and press
Enter # key.
Diff Disp
To set the Difference Display Option:
1. Use the Tab keys $@ to highlight Diff Disp.
Measure Options
Store Samples is Off
Pass/Fail is Off
Auto Std is On
Averaging :1
Diff Disp :Off
2. Press the Enter key # to open the Diff Display menu.
3. Use the Tab keys $@ to highlight the desired display
method:
Off, Numbers, or Words.
4. Press the Enter # key to save your setting and return to the
Measure Options menu.
Color Options
The Color Options configuration allows you to determine the
following settings:
• Active Functions –Allows you to select the colorimetric
functions and indices that are available in the color data
parameters. An arrow (>) indicates the function is active.
• Active Illum/Obs – Allows you to select the illuminant/
observer combinations that are available in the color data
parameters. An arrow (>) indicates the illum/obs
combination is active.
• Opacity – Determines the data display method for opacity
measurements, and allows k1 and k2 value editing.