X-Rite 962 - Page 48

SETTING INSTRUMENT CONFIGURATION
4-21
Date Setting
1. Use the Tab keys $@ to highlight
Month and press the Enter
# key to open the
Set Month menu.
Set Month
CLEAR
↓
03
↑
Save & Exit
2. Use the Tab keys $@ to choose the desired month digit
(arrows above and below the designate selection). Press the
Enter key # to access the alphanumeric editor.
NOTE: Highlighting CLEAR and pressing the Enter key # is a quick
method to zero the value.
3. Use the Tab keys $@ to highlight desired number and press
the Enter # key to exit the editor.
4. When editing is complete, use the Tab keys $@ to highlight
Save & Exit and press the Enter # key.
5. Continue with Day and Year setting if required.
Time Setting
1. Use the Tab keys $@ to highlight
Hour and press the Enter
# key to open the
Set Hour menu.
2. Use the Tab keys $@ to highlight the desired hour digit
(arrows above and below designate the selection). Press the
Enter key # to access the alphanumeric editor.
NOTE: Highlighting CLEAR and pressing the Enter key # is a quick
method to zero the value.
3. Use the Tab keys $@ to highlight the desired number and
press the Enter # key to exit the editor.
4. When editing is complete, use the Tab keys $@ to highlight
Save & Exit and press the Enter # key.
5. Continue with Minute setting if required.