Xerox 6279 - General Administration Settings

Once you are logged in as an Administrator, you are able to view and make changes on
the Administration tab of the Machine Information screen.
Exiting System Administration Mode
To exit the System Administration mode:
1. Select the Log In/Out button to access the System Administrator screen.
2. Select System Administrator Log Out.
3. Select Yes to confirm that you wish to log out.
The system will exit System Administration mode and the Guest icon will appear in the
upper right corner of the screen.
General Administration Settings
The General Administration settings enable you to display and set the time on the
machine, change the administrator password, shut down and restart the system, and
perform job accounting tasks. If you are not already logged in as an System
Administrator, you are prompted to enter a System Administrator password to access
the General Administration settings.
General Administration provides the following functions:
• Setting the Date and Time
• Changing the Administrator Password
• Configuring Job Accounting
• Configuring Job Reprint
• Shutting down and restarting the system
• Enabling/Disabling Image Recall
• Enabling/Disabling Immediate Image Overwrite
• Setting Scan Displays
5-5
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
System Administration