Original Type
Select the Original Type from the available options on the Basic Copy tab.
• Photo (Halftone)
• Photo (ConTone)
• Text/Photo
• Text/Line
• Text/Line (Clear)
Refer to Document Input in the Product Overview chapter, for details on copying special
original types.
Media Source
The Media Source selections enable you to select where the media for the copy job is
fed. The definition describing each selection under Media Source is that which is currently
loaded. The Media Source indicates the type of media that is currently loaded.
The factory default setting is Auto Select.
NOTE
If you prefer a different media series (ARCH, ANSI, etc.), go to Machine Info
> Media Status and Setup and change the series.
1. Select Copy on the Services menu.
The Copy screen displays.
2. Choose from the following Media Source selections:
• Auto Select:The machine automatically selects the correct media based on the
original size detected and the specified reduction and enlargement.
• Cut Sheet Media:Cut sheet media is the media type which is loaded in the Manual
Feed-in Shelf (Bypass). The Media Feed-in Shelf is the last choice shown in the
column.
• Roll Media:Select from the roll media size(s) loaded in the Media Drawers.
Output Format
The Output Format feature permits you to specify the media cut mode.
Xerox
®
6279
®
Wide Format Solution
2-10
Copy/Scan User Guide
Copying and Printing Documents
To Next Page
Loading...
Need help?
General
