Xerox 6279 User Manual

Rear View
Table 2: System Components
FunctionComponentNo.
Where your original scanned document exits the printer.Document Ejection Port1
Where your output/print exits the printer.Print Ejection Port2
Used to supply main power to the printer and removes
power during a surge for safety purposes.
Circuit Breaker Switch3
Used to check the Circuit Breaker is functional.Circuit Breaker Test Button4
The Service Log and Test Prints are kept inside this door.Waste Toner Bottle Door5
Used to reset the power on the Scanner as required.Scanner Power Cord
Receptacle
6
WARNING
Never touch a labeled area on hot or sharp parts. You may receive a burn or incur
other injuries.
Controller Front View
The Accxes Controller communicates with the Print Engine/machine via the Command
Status Interface. The Command Status Interface software provides status messages
about the operation of the print engine.
Xerox
®
6279
®
Wide Format Solution
1-4
Copy/Scan User Guide
Product Overview

Xerox 6279 Specifications

General

Brand	Xerox
Model	6279
Category	All in One Printer
Language	English