The Services menu screen displays.
2. Select Machine Info.
The Machine Info screen displays.
3. Select the Administration tab.
4. Select Control Panel from the Administration tab.
5. Select Configure timers....
The Set Timeout Durations screen displays.
6. Select File Deletion Timeout from the Timers menu.
The second Set Timeout Duration screen displays.
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
Print Interrupt Timeout
The print interrupt timeout feature is enabled when a user needs to interrupt the printer
for a period longer than one minute.
1. Press the Services button on the Control Panel.
2. Select Machine Info.
3. Select the Administration tab.
4. Select Control Panel from the Administration tab.
5. Select Configure Timers . . .
The Set Timeout Duration screen displays.
6. Select Print Interrupt Timeout
The Print Interrupt Timeout screen displays.
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
Set Start Scan Mode
You can select whether a document will begin scanning automatically once it is detected
by the Scanner, or whether it is necessary to press the Start button on the Control Panel
to initiate the scan after the document prefeeds.
The factory default setting is Automatic.
When you insert the document and manual start is enabled, you will not receive a
message to press the Start button.
1. Press the Services button on the Control Panel.
The Service menu displays.
2. Select Machine Info.
The Machine Info screen displays.
Xerox
®
6279
®
Wide Format Solution
5-18
Copy/Scan User Guide
System Administration
To Next Page
Loading...
